Stoves Stove 82757004 User Manual

Users Guide & Installation  
Handbook  
Stoves 60 - 70 - 90cm  
Hob Rotary UK  
Part No 082757004 Date 28/11/2014  
 
CONTENTS & INTRODUCTION  
WARRANTY EXCLUSIONS  
Damage or calls resulting from transporta-  
tion, improper use or the replacement of  
removable parts.  
Costs incurred for calls to put right an ap-  
pliance which is improperly installed.  
Appliances found to be in use within a  
commercial environment, plus those which  
are subject to rental agreements.  
Before using the hob  
Make sure that you have removed all  
packaging, wrappings, stickers and films  
from the hob surface.  
It is recommended that you clean and  
wash the hob surface before using for the  
first time.  
Apply a thin coat of ceramic hob cleaner  
to the hob to help maintain and protect it.  
See the customer care section for details  
of how to obtain all the available cleaning  
products.  
 
SAFETY  
BEFORE USING THE PRODUCT  
appliance. Cleaning and  
Make sure that you have removed all  
packaging and wrapping. Some of the  
items inside this appliance may have  
additional wrapping.  
user maintenance shall  
not be made by children  
without supervision.  
GENERAL  
WARNING! -  
WARNING! - The  
Unattended cooking on  
a hob with fat or oil can  
be dangerous and may  
result in fire.  
appliance and its  
accessible parts become  
hot during use. Care  
should be taken to  
NEVER try to extinguish  
a fire with water, but  
switch off the appliance  
and then cover the flame  
with a lid or damp cloth.  
WARNING! - Danger of  
fire: Do not store items  
on the cooking surfaces.  
Never leave any cook  
zone on without a pan  
covering it. This causes a  
fire hazard.  
WARNING! - Servicing  
should be carried out  
only by authorised  
personnel.  
avoid touching heating  
elements. Children less  
than 8 years of age shall  
be kept away unless  
continously supervised.  
This appliance can  
be used by children  
aged from 8 years and  
above and persons with  
reduced physical sensory  
or mental capabilities or  
lack of experience and  
knowledge if they have  
been given supervision  
or instruction concerning  
the use of the appliance  
in a safe way and  
WARNING! - The  
appliance must never be  
disconnected from the  
understand the hazards  
involved. Children  
shall not play with the  
mains supply  
5.162  
 
SAFETY  
during use, as this will  
seriously affect the  
safety and performance,  
particularly in relation  
to surface temperatures  
becoming hot and gas  
operated parts not  
correctly fitted.  
WARNING! - There is  
a risk of electric shock,  
so always make sure  
you have turned off  
and unplugged your  
appliance before  
working efficiently. The  
cooling fan (if fitted) is  
designed to run on after  
the control knob has  
been switched off.  
starting. Always allow  
the product to cool down  
before you change a  
bulb.  
WARNING! - Do not  
modify the outer panels  
of this appliance in any  
way.  
WARNING! - This  
appliance must be  
earthed.  
WARNING! - The top  
element gets extremely  
hot when in use, so take  
care to avoid touching it.  
WARNING! -  
Do not spray aerosols  
in the vicinity of this  
appliance while it is in  
operation.  
WARNING! - Do not  
store or use flammable  
liquids or items in the  
vicinity of this appliance.  
WARNING! -  
Do not modify this  
appliance.  
WARNING! - Do not  
operate the appliance  
GAS WARNING! -  
If you smell gas:  
Do not try to light any  
appliance.  
Do not touch any  
without the glass panel  
5.162  
 
SAFETY  
electrical switch.  
Contact your local gas  
supplier immediately.  
on the hob surface since  
they can get hot.  
Ensure you switch off  
the appropriate cook  
zone individually or (by  
the central on/off key if  
touch control) when you  
have finished cooking,  
do not rely upon the  
automatic pan detection  
system as your means  
of switching “off” the  
appliance.  
ELECTRIC INDUCTION HOB  
WARNING:-  
Unattended cooking on  
a hob can be dangerous  
and may result in fire.  
NEVER try to extinguish  
a fire with water, but  
switch off the appliance  
and then cover flame  
e.g. with a lid or a damp  
cloth.  
This induction hob  
complies with the  
Danger of fire: do not  
store items on the  
cooking surface.  
applicable EMC and EMF  
standards. Therefore it  
should not interfere with  
other electronic units.  
Persons fitted with a  
pacemaker or any other  
electrical implant should  
clarify with their doctor  
or the producer of the  
implant, whether there  
implant is adequate and  
If the surface is cracked,  
broken or shattered,  
switch off the appliance  
to avoid the possibility of  
electric shock and call for  
a service engineer’s visit.  
Metallic objects such as  
knives, forks, spoons and  
lids should not be placed  
5.162  
 
SAFETY  
fail-safe.  
The pacemaker  
must be designed  
in compliance with  
the appropriate  
regulations.  
Prolonged intensive use  
of the appliance may call  
for additional ventilation,  
for example opening  
of a window, or more  
effective ventilation,  
for example increasing  
the level of mechanical  
ventilation where  
Caution: This appliance  
is for cooking purposes  
only. It must not be used  
for other purposes, for  
example room heating.  
present.  
Induction Hob  
Parts of the appliance  
may become hot while  
in use. Always make  
sure that children  
are supervised when  
they are near to the  
appliance.  
Always position pans  
over the centre of the  
cook zone, and turn  
the handles to a safe  
position so they cannot  
be accidentally knocked  
or grabbed.  
Caution: The use of a  
gas cooking appliance  
results in the production  
of heat, moisture and  
products of combustion  
in the room in which it is  
installed. Ensure that the  
kitchen is well ventilated  
especially when the  
appliance is in use.  
Keep natural ventilation  
holes open or install a  
mechanical ventilation  
device (mechanical  
Do not leave pans on  
extractor hood).  
5.162  
 
SAFETY  
the hob when you’re not damaged.  
around - take them off  
the cook zone if you  
have to leave the kitchen  
even if you think it will  
only be for a moment,  
while you answer the  
door or phone.  
The glass ceramic can  
get hot whilst cooking;  
even though the cook  
zone itself does not  
generate heat. The heat  
generated is conducted  
back from the hot pans.  
If you use a griddle plate  
ensure it is completely  
cool before attempting  
to lift it from the hob as  
residual heat may cause  
burns, Always use oven  
gloves to protect your  
hands.  
Keep electrical leads  
from trailing over or  
going near the hob.  
The appliance must  
never be disconnected  
from the mains supply  
during use as this will  
seriously affect the  
The appliance has a  
glass hob top, make  
sure you do not drag  
pans across the ceramic  
surface as this will  
lead to scratches and  
damage.  
Do not use the hob  
surface as a chopping  
board or food  
safety and performance,  
particularly in relation  
to surface temperatures  
becoming hot and  
component parts not  
working efficiently. The  
cooling fan (if fitted) is  
designed to run on after  
the control has been  
switched off.  
preparation area as this  
may lead to it becoming  
5.162  
 
SAFETY  
This hob is not intended to be  
opertated by means of a external  
timer or seperate remote control  
system.  
Pull the plug out, or switch off the  
power at the fuse box - this may be  
enough to stop the fire immediately  
Smother the fire with a fire blanket,  
or use a dry powder or carbon dioxide  
extinguisher  
Fire Safety Advice  
Most kitchen fires occur when people are  
distracted or leave things unattended, so  
remember:  
Never use water on an electrical or  
cooking oil fire.  
If you’re called away from the cooker - by  
the phone or someone at the door, either  
take pans off the heat, or switch off your  
hob.  
DISPOSAL  
Packaging Material  
The packaging materials used with this  
appliance can be recycled.  
Don’t let yourself be distracted while  
cooking.  
Please dispose of the packaging materials  
in the appropriate container at your local  
waste disposal facilities.  
If you do have a fire in the kitchen, don’t  
take any risks - get everyone out of your  
home and call the Fire Brigade.  
Unattended cooking on a hob with fat or  
oil can be dangerous and may result in a  
fire. NEVER try to extinguish a fire with  
water, but switch off the appliance and  
then cover flame e.g. with a lid or a fire  
blanket.  
Old Appliances  
The Symbol  
on the product or on  
its packaging indicates that this product  
may not be treated as household waste.  
Instead it should be taken to the appli-  
cable collection point for the recycling of  
electrical and electronic equipment.  
WARNING - If a pan catches fire:  
Do not move it - it is likely to be  
extremely hot  
Turn off the heat if it’s safe to do so  
- but never lean over a pan to reach  
the controls.  
You will by ensuring the appliance is cor-  
rectly disposed of help prevent potential  
negative consequences for the environ-  
ment and human health.  
If you have a fire blanket, put it over  
the pan.  
If you have put the fire out, leave the  
pan to cool completely.  
For additional details regarding the recy-  
cling of this product please contact your  
local government office, your household  
waste disposal service or the retailer  
where you purchased the product.  
Deep-fat frying presents more  
dangers in your kitchen.  
Never fill a chip pan (or other deep-  
fat fryer) more than one-third full of  
oil  
Do not use a fire extinguisher  
on a pan of oil - the force of the  
extinguisher can spread the fire and  
create a fireball.  
If you have an electrical fire in the  
kitchen:  
5.162  
 
USING THE HOB - ELECTRIC (CERAMIC)  
Using Rotary Controls  
switched on a cook zone and remains  
lit for a while after all the cook zones  
have been switched off to show that  
the surface may still be hot to touch.  
Select the cooking zone you wish to  
use.  
Place a suitable pan within the desig-  
nated cooking zone.  
You can use the residual heat to save  
energy, e.g. to keep a small dish  
warm  
Turn the assigned control knob to the  
power setting you wish to use.  
Power setting 1 is the lowest and 6 is  
the highest.  
Cooking Surface layout  
1
To switch off, turn the selected con-  
trol knob to the ‘off’ position.  
Note:  
5
6
4
3
1
2
The power settings on the hob do  
5
6
4
3
1
2
not indicate any set temperature and  
cannot be used to judge one element  
against another.  
5
6
2
4
3
1
2
5
6
4
3
1
2
During cooking, the cook zone  
elements will cycle on and off. This  
provides the correct power setting  
and prevents the hob from overheat-  
ing.  
3
Cooking Zone  
1
2
3
Control Knobs  
Hot Hob indicator (if ꢁtted)  
WARNING! - Risk of burns from residual  
heat!  
Cooking zone control knob  
1
The glass surface of the hob gets  
extremely hot during and after use,  
under no circumstances allow any  
person and especially children to  
touch, sit or stand on the hob glass  
surface.  
5
6
4
3
2
1
Allow the hob to fully cool, which can  
take approx 30 mins before the hob  
is safe to touch e.g. for cleaning.  
2
3
Assignment of control knobs  
Power setting (0 - 6)  
Oꢀ position  
1
2
3
Hot Hob Warning (if fitted)  
Some appliances have a hob hot light  
fitted to provide an additional visual  
warning regarding the temperature of  
the glass surface.  
Note; Generic illustrations shown above your  
appliance may visually differ.  
If your appliance has this feature it  
will have the word “Hob Hot” writ-  
ten on the glass and a red light will  
illuminate shortly after you have  
 
CLEANING  
ELECTRIC HOB  
follow the circular grooves and avoid  
damaging the red spots. Make sure  
that you allow the hotplate to dry  
before use by switching on the ele-  
ments at a low heat.  
Ceramic glass hobs  
It is recommended that you clean  
and wash the hob surface before  
using for the first time. Apply a thin  
coat of ceramic hob cleaner to the  
hob to help maintain and protect it.  
You can restore the hotplates by us-  
ing a solid plate cleaner but take care  
to avoid the red spots on elements.  
The ceramic hob top can be cleaned  
using a clean, damp cloth or kitchen  
paper. Do not use a used dishcloth  
or sponge as they can leave a film of  
detergent on the surface which can  
lead to discoloration. Please ensure  
that the elements are cooled fully to  
avoid steam burns.  
To prime: Switch on each element in  
turn for a short while (with no pan on  
it) at a medium - high setting. This  
will harden and burn off the coating.  
To season: Heat the element for 30  
seconds at a medium setting then  
switch off. Use a minimum amount  
of unsalted vegetable oil, on a dry  
cloth or paper towel, and apply a thin  
coat of oil to the element surface.  
Wipe off the excess and heat the ele-  
ment for one minute.  
You can use a specialist ceramic  
cleaner to restore the surface, but  
use sparingly to avoid coating the  
hob top too thickly. Too much cream  
cleaner will lead to discolouration.  
Use a dry, clean cloth to polish the  
surface.  
Notes:  
The edge of the ceramic glass will  
always appear to be a different colour  
than the top surface due to the  
ground safety edge.  
For stubborn marks, a specialist hob  
scraper or cleaner can be used.  
Do not use steam cleaners or high-  
pressure cleaning equipment.  
Scratches or dark stains on the  
ceramic glass that cannot be re-  
moved do not affect the function of  
the appliance.  
Regular cleaning will prevent any  
salts or minerals from accumulating  
on your hob and discolouring the  
glass.  
Safety when Cleaning  
For cleaning, the appliance must be  
switched off and cooled down.  
Wipe any spillage as soon as pos-  
sible.  
WARNING! Risk of burns from residual  
heat.  
Clean the hob top as regularly as  
possible, this will prevent any build  
up of grease which may be a fire  
hazard.  
Solid plate hobs  
Prime and Season - this helps main-  
tain the finish of the elements.  
Use a damp, clean cloth to wipe the  
solid plate, making sure that you  
 
INSTALLATION  
General information  
between hob base and appliance must be  
maintained.  
Installation should only be carried out by  
a qualified installer or engineer.  
Installation above an oven  
Please keep to the following points most  
carefully;  
Refer to the manufacturer’s instructions  
for clearances above the oven.  
Although every care has been taken to  
ensure this appliance has no burrs, or  
sharp edges, we recommend that you  
wear protective gloves when install-  
ing and moving this appliance. This will  
prevent injury.  
We recommend a 25mm gap between the  
bottom of the hob and appliance.  
Installation above a unit with a  
drawer or door  
The base of the appliance must be pro-  
tected from damage e.g. draws may only  
be installed providing a partition panel is  
fitted to the required dimensions under-  
neath the appliance.  
The minimum distances to other appli-  
ances and units are to be observed.  
Wall surfaces above the work surface and  
in the immediate vicinity of the cooking  
hob must be heat resistant.  
INSTALLATION ABOVE AN OVEN  
Laminated surfaces and the adhesive  
used for fixing them must be heat resis-  
tant in order to avoid any damage.  
The space for air circulation, located  
underneath and at the back of the hob  
improves its reliability by ensuring that it  
will cool down, efficiently.  
Worktop  
Oven  
Hob  
25mm  
Installations should be carried out in line  
with the National Regulations applicable  
with this product type.  
Note: Avoid installing the appliance next  
to doors and under windows. This will  
avoid the potential for hot cookware  
being knocked off the hob when doors  
and windows are opened (Risk of burns).  
INSTALLATION ABOVE A UNIT WITH  
A DRAWER OR DOOR  
Worktop  
Hob  
Built-in appliances may only be used after  
they have been built-into suitable built-in  
units and surfaces that meet the required  
standards.  
25mm  
Partition  
CHOOSING YOUR INSTALLATION  
We recommend that you install this ap-  
pliance in a work top which is a minimum  
38mm deep.  
The hob can be fitted into a work top  
less than 38mm deep, but the 25mm gap  
 
INSTALLATION  
Clearances and dimension – require-  
ments  
There must be a minimum clearance of  
50mm between the rear edge of the hob  
and the rear wall. This clearance must  
be maintained up to 650mm above the  
worktop.  
No shelf or overhang of combustible  
material should be closer than 650mm  
above the hob.  
When installing an extractor hood above  
the hob, refer to their Manufacturer’s  
instructions.  
There must be a minimum clearance of  
50mm between the edges of the hob  
and any side walls; this clearance must  
be maintained up to 420mm above the  
worktop.  
Minimum distance  
between carcasses must  
be equal to width of hob  
650mm min  
*
420mm min  
560mm (60cm Hobs)  
660mm (70cm Hobs)  
737.5mm (77cm Hobs)  
860mm (90cm Hobs)  
50mm min  
50mm min  
30mm min /  
50mm max  
490mm (60 - 70cm Hobs)  
487.5mm (77cm Hobs)  
370mm (90cm Hobs)  
50mm Min  
Minimum height to extractor  
as recommend in extractor  
instruction manual  
*
 
INSTALLATION  
Fitting into worktop  
Recessed Method  
Cut a hole in the work surface to the  
required size. The worktop must be of  
heat-resistant material or covered with  
heat-resistant material.  
Recess the work top to the appropriate  
depth (Approx 5mm) and shape to fit the  
hob (add 1mm to overall glass size). Refer  
to the installation bracket advice to deter-  
mine your installation type. Insert the hob  
into the recess, ensuring that the foam  
seal is sitting correctly. Locate and attach  
the securing clamps as required, Tighten  
the screws so that the hob is pulled down  
firmly against the worktop, thus ensuring  
a good seal.You may want to fill any gap  
between the hob top glass and the work  
top surface with silicone sealant.  
Protecting the cut-out;  
The types of chipboard used for work  
surfaces swell relatively quickly in contact  
with humidity.  
Apply a suitable sealant to the cut edge to  
protect it from moisture ingress.  
This hob can be installed conventionally  
(glass above the work top) or recessed  
into the work top for a flush fit.  
DO NOT fit silicone sealant under the  
glass hob instead of the self adhesive seal.  
Self adhesive seal  
Apply the self adhesive seal to the  
underside edges of the hob glass. For best  
results, the seal should be adhered along  
each side in turn, as close to the edge as  
possible, and trimmed at each corner, tak-  
ing care to ensure a neat join.  
CONVENTIONAL INSTALLATION  
1
Worktop  
Hob  
UNDERSIDE OF HOB  
SELF ADHESIVE SEAL  
1
SEAL  
RECESSED METHOD  
2
1
Conventional Installation  
Worktop  
Hob  
Refer to the installation bracket advice  
to determine your installation type. Place  
the hob in the aperture, checking the hob  
glass is covering the work top along all  
four sides.  
Set the front edge of the appliance paral-  
lel with the front of the work top.  
Locate and attach the securing clamps  
as required, Tighten the screws so that  
the hob is pulled down firmly against the  
worktop, thus ensuring a good seal.  
1
2
SELF ADHESIVE SEAL  
SILICONE SEALANT  
 
INSTALLATION  
Installation Bracket Advice  
Installation pack 2  
Secure the hob to the worktop by means  
of the brackets provided, taking the thick-  
ness of the worktop into account.  
4 x Cranked installation bracket  
4 x Spire clips (70/77/90cm appliances  
only)  
4 x No8 Screws  
UNDERSIDE OF HOB  
Depending on your appliance the cranked  
bracket may or may not require the spire  
clips detailed in pack 1. If your appliance  
is not supplied with spire clips, the  
installation brackets screw directly into  
the base of the hob in the ported holes  
provided.  
INSTALLATION POSITIONS  
1
4
30mm  
INSTALLATION POSITIONS  
2
Depending on your appliance it will be  
supplied with one of the following  
installation packs;  
3
70 & 90cm  
Appliances only  
40mm  
50mm  
Installation pack 1  
4 x “U” shape installation brackets  
4 x Spire clips  
4 x No8 Screws  
1
2
3
4
Worktop  
Bracket  
Screw  
The spire clips must be fitted to the base  
of the hob prior to fitting the installation  
Spire clip  
brackets.  
1
Important;  
Do not modify this appliance.  
30mm  
4
2
3
1
2
3
4
Worktop  
Bracket  
Screw  
40mm  
50mm  
Spire clip  
 
INSTALLATION  
CONNECT TO THE ELECTRICITY  
SUPPLY  
Remove the cable clamp screw and  
release the cable clamp retaining  
arm.  
WARNING: This appliance must be  
earthed. Only connect to the electrical  
mains terminal with the power switched  
off. The electrical mains terminal is live.  
Note;  
The cable clamp has a ratchet type  
mechanism on the right hand side of the  
retaining arm.  
Follow the terminal block connection  
schematic  
Strip the wires & connect to the  
terminal block as appropriate:-  
Loose and inappropriate connections can  
make the terminal overheat.  
Ensure the cable clamp is fitted correctly  
and securely.  
Terminal Block Connection  
Schematic  
A device must be provided in the  
electrical installation which allows the  
appliance to be disconnected from the  
mains at all poles with a contact opening  
of at least 3mm.  
We recommend that the appliance is con-  
nected by a competent person who is a  
member of a “Competent Person Scheme”  
who will comply with the required local  
regulations.  
5
4
Connection should be made with a suit-  
able cable.  
Firstly open the terminal block cover  
using a small flat bladed screwdriver  
in the door release tabs shown below.  
BROWN / L1  
4
5
Live  
230V.....240V  
BLUE / N  
GREEN/YELLOW / PE  
3
Neutral  
Earth  
1
2
Fit the cable clamp & secure with the  
screw provided.  
Close the terminal box, ensuring that  
the cover is closed and all screws are  
tight and in place.  
1
2
3
Door release tab  
Important: Ensure that you route all  
mains electrical cables well away from any  
adjacent heat source, such as the base of  
the hob an oven or grill.  
Cable clamp ratchet  
Cable clamp screw  
 
TECHNICAL DATA  
SUPPLY: 220 -240V ~ 50Hz 4.85kW - 6.20kW  
Refer to the data badge on the under side of your hob for specific  
power rating of your model  
 
CUSTOMER CARE  
CUSTOMER CARE WEB SHOP  
range of Bake ware and Cookware essen-  
tials including Roasting Pans, Cake Tins  
and Non-Stick Cooking Liners.  
Having purchased a superior cooker, hob  
or hood from us, you’ll naturally want to  
keep it looking great. And who better to  
help you care for it than the manufac-  
turer?  
For all enquires, please visit our Web  
call the Spares Sales Team on 0844  
815 3745. For countries outside the UK,  
please contact your local service agent.  
We offer an extensive range of accesso-  
ries, components and cleaning products  
which, will instantly give your cooker a  
good as new look.  
In addition to the list of our most popular  
products below, we also have an exciting  
Product De-  
Where used  
scription  
Purpose  
Enables easier cleaning of your ceramic hob.  
Prevents build up of mineral deposits. Best  
used with Ceramic Hob Scraper Kit. 300ml  
bottle.  
All Ceramic glass  
Ceramic Hob  
hobs including  
Cleaner  
Induction  
All Ceramic glass  
Ceramic Hob  
Ideal for removing cooked on marks from  
ceramic glass hobs Best used with Ceramic  
Hob Cleaner  
hobs including  
Scraper kit  
Induction  
Sealed Hotplate  
Conditioner  
All sealed/solid  
plate hobs  
Restores the sleek matt black finish to solid  
hotplates  
Multipurpose  
Kitchen Cleaner  
General kitchen  
cleaner  
Excellent multipurpose cleaner, For use  
around the kitchen. 500ml bottle.  
All cooking appli- Cuts through grease & burnt on grime. 500ml  
ances. bottle  
Oven Cleaner  
Restor-A-Cloth  
All cooking appli- Chemical free cleaning cloth Ideal for clean-  
ances. ing & polishing glass & stainless steel  
Stainless Steel  
Cleaner  
All stainless steel Oil based cleaner. Perfect for removing stub-  
parts  
born & greasy marks. 300ml bottle.  
New filters, help to maintain efficient cooker  
hood operation and keep your Kitchen odour  
free  
Rectangular car-  
Cooker Hoods  
Cooker Hoods  
bon filters  
New filters, help to maintain efficient cooker  
hood operation and keep your Kitchen odour  
free  
Round Carbon  
Filters  
15.030  
 
Please keep this handbook for future reference, or for anyone else  
who may use the appliance.  
 
CUSTOMER CARE  
To contact Stoves about your appliance, please call  
Warranty Registration  
0844 481 0182  
to register your appliance  
Customer Care Helpline  
0844 815 3740  
in case of difficulty within the UK  
Alternatively general, spares and service information is available from our website at  
Please ensure that you have the product’s model no and serial no available when you  
call. These can be found on the silver data label on your product which is located:  
Ovens  
High-level grill products  
Hobs  
Open the door; adjacent to the oven cavity  
Inside the base compartment  
On the underside of the product  
Enter appliance numbers here for future reference:  
Model No  
Serial No  
SERVICE RECORD  
Date of purchase  
Installed by  
Installation Date  
Engineer’s name  
Place of purchase:  
Date  
Part(s) replaced  
For customers outside the UK and Northern Ireland, please contact your local supplier.  
Glen Dimplex Home Appliances, Stoney Lane, Prescot, Merseyside, L35 2XW  
 

Sharp Air Cleaner KC 860U User Manual
Sharp Car Satellite TV System LC 40LE700X User Manual
Soleus Air Air Conditioner SG PAC 10E2 KY 101 User Manual
Sony Car Stereo System AVD S50ES User Manual
Sony Flat Panel Television XBR55X810C User Manual
Sony Microphone ECM T15 User Manual
Sony Personal Computer PCV RX560 User Manual
State Industries Water Heater SBD100400NE A User Manual
Sunbeam Electric Heater HE4200 User Manual
SUPER MICRO Computer Personal Computer IRV 3702 User Manual